Suppliers with verified business licenses
Audited Supplier
| 1-1 Name & Model | EPS-200L Planetary Mixer (7.5kw/4P -7.5kw/4P) | |
| 1-2 Structure | A. Hydraulic double-column lifting type; B. Direct material temperature measurement mode; C. Double dispersing shaft + double stirring shaft + temperature measurement + wall hanging. |
|
| 1-3 Tank (Mixing Barrel ) | Design volume: 120L. thickness 5mm, double layer for cooling & heating Working volume 100L, working coefficient 0.3-0.75 |
|
| A. Liner material: SUS304; B. After the inner wall is turned, the mirror surface is polished to ensure good roundness; C. The upper flange plane of the mixing barrel and the upper barrel are sealed by the sealing ring; D. There are 4 rollers at the bottom and one handle.. |
||
| 1-4 Tank Cover | A. Material: SUS304. B. The powder/liquid feeding hole, which can be switched on and off quickly; 1 spotlight; with 1 small window (a spotlight port and an observation hole |
|
| 1-5 Mixing Principle | Two serrated dispersing discs installed on the high-speed dispersing shaft; at the same time, combined with the low-gap design of the double stirring paddles, there is no dead angle, the strong kneading interference motion of the low-speed stirring paddles and the up-down/left-right circular motion, and the high-speed shearing of the dispersing disc At the same time, the special PTFE plate is used to continuously scrape and scrape the residual material on the wall of the pot to ensure that the material is fully dispersed and evenly mixed, and there is no dead angle. | |
| 1-6-1 revolution/stirring motor, frequency converter and reducer | A. Quantity: one; B. Motor power: 7.5Kw/4P C. One 7.5 KW variable frequency speed governor matched with the motor. D. Matching KA107 reducer, the reduction ratio is about I=28. |
|
| 1-6-2 Planetary revolution speed | Speed: 0~50rpm, adjustable. | |
| 1-6-3 Scraper |
Quantity: 1 set; scraping wall material: SUS304 and PTFE; consistent with the planetary revolution speed. | |
| 1-7-1 Stirring shaft/paddle speed | Speed: 0~65rpm, adjustable. | |
| 1-7-2 Stirring paddle | A. Material: SUS304; B. Quantity: two (group). | |
| 1-7-3 Selection of stirring paddle form | Casting twist | |
| 1-8-1 Disperser Motor |
A. Quantity: one; B. Motor power: 7.5Kw/4P; C:With a 7.5KW frequency converter matched with the motor. |
|
| 1-8-2 Dispersion speed (rotation) | Speed: 0~1400rpm adjustable | |
| 1-8-3 Dispersion Shaft | A. Material: SUS304; B. Diameter of dispersion disc: Φ100mm; C:The number of dispersion discs is 2 per group, 2 groups, 4; |
|
| 1-9 Lift System ( double-column) | A. Hydraulic lift: plunger cylinder with guide rod, positioning device; positioning, Safe and reliable. B. Equipped with one hydraulic oil station and one 1.5Kw/4P motor; no oil leakage and low noise. C:Lifting height: ≤800. |
|
| 1-11 GPS | A. With positioning adjustment device and locking device, it can accurately position the mixing barrel and prevent rotation. B. The positioning stop of the lower flange of the upper barrel body is precisely matched with the mixing barrel to ensure that the mixing barrel is in the same position., the positioning is accurate. |
|
| 1-12 Electric cabinet | The frequency conversion speed regulation, temperature display (control), spotlight, lift, operation emergency stop and other functions are displayed and operated on the power distribution cabinet during the operation of the equipment. Remarks: Dispersion has timing function (recommended for users to use, regular design does not include this). |
|
| 1-13 Safe operation | A. Relying on the limit travel switch and through a specially designed control route, it is guaranteed that the upper barrel (kettle cover) will automatically stop after rising or falling to the specified position. | |
| B. During the rising process of the upper barrel, the stirring and dispersing part of the equipment cannot be started; similarly, when the machine is running the mixture, the upper barrel cannot be raised, and the mixing barrel cannot be opened. | ||
| 1-14 Temperature measurement method | 0-199ºC, the temperature measuring probe is specially designed on a shaft in the pot, which is in direct contact with the material | |
| 1-15 Host total power: 16.5KW | Working voltage/frequency: 380V/50Hz/3-phase; Control voltage: 380V. | |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}